Elstein IRS/K rod heaters are ceramic infrared heaters, which are available in different lengths of up to 300 mm and surface ratings of up to 75 kW/ m²
Unlike the IRS Series heaters, which have the leads running through the mounting sockets on each side, the leads of IRS/K Series lie only on one side.
Thus IRS/K heaters make the heating of the interior of hollow bodies like tubes or bottles possible.
Linear heating tasks that need one-sided leads can be solved, too.
If required IRS/K rod heaters are available with double sided leads.
Elstein IRS/K rod heaters cover the power range from 125 W to 750 W.
Technical Details :
|Type // Weight g // Wattage W||IRS/K 300 mm||100||300||to||750|
|Length // Weight variable||Wattage variable|
|IRS/K 125 mm||40||125||to||300|
|Typical operating temperature||°C||400||to||700|
|Maximum permissible temperature||°C||750||to||750|
|Wavelength range||µm||2 – 10|
Further Information :
|Standard Design||Thermocouple Heater||Variants|
|operating voltage 230 V||integrated thermocouple type K (NiCr-Ni)||special lengths|
|leads up to 400 mm||description T-IRS/K + length specification mm||special wattages|
|rod completely or partially heated||TC leads up to 400 mm||special voltages|
|two fixing springs||extended leads|
|power leads with ring terminals|
The power can be controlled by using thermocouple heaters with TRD temperature controllers, TSE thyristor switching units and other accessories.
The national safety regulations must be complied with for the respective application, for example, the IEC or EN standard 60519-1, Safety in electrical heating installations.
Further information and safety instructions are mentioned in the mounting sheet, which is attached to each heater.